±0.05 mm0.5–20 mm steelDXF / DWG / STEP
Fiber Laser Cutting
High-precision fiber laser cutting for steel, stainless steel, and aluminum. From prototype to production runs with tolerances as tight as ±0.05 mm.
Materials & Thickness Ranges
| Material | Min | Max |
|---|---|---|
| Carbon steel | 0.5 mm | 20 mm |
| Stainless steel | 0.5 mm | 16 mm |
| Aluminum | 0.5 mm | 12 mm |
| Copper / Brass | 0.5 mm | 6 mm |
Tolerances by Thickness
| Thickness Range | Typical Tolerance |
|---|---|
| 0.5–3 mm | ±0.05 mm |
| 3–6 mm | ±0.10 mm |
| 6–12 mm | ±0.15 mm |
| 12–20 mm | ±0.20 mm |
Edge Quality & Kerf
Fiber laser produces clean, oxide-free edges with minimal heat-affected zone. Typical kerf width: 0.15–0.25 mm depending on material and thickness.
Accepted File Formats
- DXF: Preferred format for 2D cutting paths
- DWG: AutoCAD native format
- STEP / STP: 3D models (we extract flat patterns)
Why fiber laser over plasma?
- Tolerances 10× tighter than plasma cutting
- Cleaner edges: no secondary finishing needed
- Fine detail and small hole capability
- Less material waste due to narrower kerf
Our Process
1
Upload Drawings
Send your DXF, DWG, or STEP files
2
Engineering Review
We verify feasibility and optimize nesting
3
Laser Cutting
Precision cutting on our fiber laser
4
Quality Inspection
Dimensional verification before delivery
Ready to start your project?
Send us your drawings or specifications and receive a detailed quote within 24 hours.
Message sent
Thank you for your inquiry
A support ticket (#__TICKET_ID__) has been created with your query, and we have emailed you a copy.